Heating is the best way of heating, such as comfort, environmental protection, health care, and so on. The temperature is descending from bottom to top. The warmth is naturally born by the feet. It makes family heating comfortable and healthy, and the characteristics of environmental protection and energy saving are being loved by more and more families.
First step: leveling the ground and cleaning up
Leveling the ground is a prerequisite for the installation of ground heating. If the uneven ground will not only affect the thermal insulation, even if it has sharp things, it will break the earth's heating pipe. The ground leveling should first remove the surface of the concave and convex parts to the surface of the ground and clean the ground, so as to ensure the surface of the ground, the wall, the column foot and the ground are 90 degrees right angle.
The second step: installation of the total control system
The water level of the distributor is installed at the designated position of the drawing, and the water distributor is on the lower water collector, and the spacing is 200mm. The center of the water collector is not less than 30cm from the ground level and is firmly installed. When installing the main pipe, the slope should be kept at a fixed distance or fixed.
The third step: laying insulation, reflective film and wire mesh.
Before laying the thermal insulation layer, a damp proof layer is first made, then a thermal insulation board reflective film and a wire mesh are laid. The insulation layer is laid on the leveling layer, the seam is sticked firmly with glue, the aluminum foil paper is laid on the thermal insulation layer or the composite aluminum coated polyaluminum film with coordinate grid line is attached to the thermal insulation layer, and the insulation layer should be laid flat.
The satisfaction of the customer is the affirmation to us, welcome you to come to choose our company's product, we always think you provide the product as our duty and always insist on doing so. Welcome to your visit.