Each household has installed heating or heating, especially the new residential area, all adopted the installation of thermal heating, not only because the heating is even, environmental protection, clean, so, what are the conditions for the installation of heating in the ground? From Ji'nan warm manufacturers for you to share:
1, the interior rough decoration is completed, and the pipe laying is smooth and clean. The flatness requirement is: 1 meters, and the height difference is <8 mm.
2, floor heating design drawings and other technical documents are complete.
3, the floor radiant heating engineering construction plan has been examined and approved, and the technical disclosure has been carried out.
4, materials, machinery and construction strength are ready, and can ensure normal construction.
5, temporary facilities such as construction site, construction water, electricity, materials and storage sites can meet construction requirements, and construction environment temperature should not be lower than 5 degrees.
6, installation process prevents paint, asphalt or other chemical solvents polluting plastic pipes.
7, before the laying of geothermal plastic pipes, check whether there is dirt and debris inside and outside the pipeline.
8, the main materials, equipment and finished products or semi-finished products used in the floor heating project.
This article is dedicated to Ji'nan's warmth and friendship, more related knowledge, please click: http://www.ycepec.com we will use the most advanced technology, the most sincere attitude, to provide you with the most comprehensive service. We will continue to dedicate to you. Please look forward to it.