远红外地板电采暖是一种以电能为能源，以碳纤维材料为电换热载体的新型采暖方式。在电场的激发下，碳分子的棕色运动产生热能和大量的远红外热传递。远红外电地暖的权力,在电场的作用下,碳纤维在碳分子做布朗运动,摩擦产生的热能,热能远红外辐射的形式向外,这个时候远红外加热会产生大量的波长8 - 15微米的远红外线辐射,受体吸收转化为热能,使受体的温度上升。这个原则就像“阳光普照万物”。
Far-infrared floor heating is a new heating method, which uses electric energy as energy and carbon fiber as electric heat transfer carrier. Under the excitation of electric field, the brown motion of carbon molecules produces heat energy and a large amount of far infrared heat transfer. The power of far-infrared electric heating. Under the action of electric field, carbon fibers do Brownian motion on carbon molecules, heat energy generated by friction and far-infrared radiation form outward. At this time, far-infrared heating will produce a large number of far-infrared radiation with wavelength of 8-15 microns, which is absorbed by the receptor and converted into heat energy, so that the temperature of the receptor rises. This principle is like "sunshine shines on all things".
加热体只需2 - 4分钟就能与保温材料达到热平衡，然后在恒温下向上导热。
It takes only 2 - 4 minutes for the heater to reach thermal equilibrium with the insulation material and then conduct heat upward at constant temperature.
Practice has proved that when the human body feels the same comfort, the ambient temperature required by infrared heating is about 3 C lower than that required by air convection heating. Therefore, through the far infrared electric heating system for indoor heating, the human body is "hot but not dry", the body is warm and the mind is fresh. In addition, the infrared auxiliary heating function of far-infrared geothermal heating can significantly reduce heating energy consumption. The product has the incomparable advantages of high efficiency, energy saving, fast heating, comfort and softness, health care, simple construction, no height, long service life, no maintenance and so on.
Far-infrared electric heating installation is simple, no complex equipment and facilities, not limited by area, floor type, floor height, not only does not occupy indoor use area, but also conducive to indoor beauty and decoration. Far infrared heating installation process is simple and fast; construction cycle is short, 100 square meters is enough for one day to use, we are responsible for all aspects of far infrared heating construction, so that customers save energy.
Compare installation cost, use cost and maintenance cost.
1. Installation costs:
No matter what kind of water heating or radiator you want, don't mention how much heating area you want to buy. As long as you install it, you need to buy a boiler. The price of the boiler is about 8000 at home and about 120,000 at import. In other words, the purchase cost of the boiler is allocated to the heating surface of each square metre. If the heating surface is large, the effect will be better. If the heating area is small, it is not economical to install water heating. There are no water dividers, pipes, heaters or thermostats, all of which are priced separately. So the average installation cost of pipeline is about 300 yuan per square meter.
2. Operational costs:
Of all heating facilities, water heating is the most expensive. Because of the slow heating speed of the water floor, it takes a long time to reach the set temperature. Therefore, it is recommended not to close it once it is opened. Otherwise, it will take a long time to reheat and waste more gas. In addition, the personal bedroom can not be controlled. Therefore, the waste of energy caused by idle rooms will increase the cost of natural use.
Radiator, the use cost is relatively low, although it can be controlled separately, but because of the low thermal efficiency, the use cost is still higher than carbon-electric heating.
The most economical is carbon fiber far infrared heating. The electrothermal conversion rate is over 99% without preheating. Use it as you walk. Real division of labor, time-sharing control. Energy consumption is 60% of electric heating and 50% of air conditioning heating.
Pipeline maintenance costs come from two aspects: first, the pipeline will produce scales, which need to be cleaned regularly; there are various valve replacement, which requires cost. Two are the heart of the pipe - the boiler. The maintenance quality of ordinary boilers is 10 years. That is to say, the depreciation cost of your products is quite high.
Far-infrared electric heating system, because of its unique physical characteristics, safety, stability, energy saving, high efficiency and health care, makes it achieve the same service life as buildings. Far-infrared electric heating has been widely used abroad, and is very popular in Finland, Japan, Russia, Korea and even the United States. At present, far-infrared electric heating has been used abroad for more than 50 years without any maintenance costs.
Comparisons between occupied height and heating setting temperature.
Pipeline is the highest of all ground heating facilities, up to 7-9 cm (excluding ground or ground). Its installation requires the height of the building. Because the concrete covering the pipe is thicker, it takes a long time to reach the indoor heating temperature. Generally, the heating area of 100 square meters needs to reach the set temperature of 18 C, which takes about 4 hours to reach. It takes two days for the whole room to reach its predetermined temperature. There is a point that water heating is not enough, can not control a single room, a boiler to control the whole family, open the whole, close the whole, is a waste of energy. Floor electric heating device.
Far infrared electric floor heating is the lowest floor height in floor heating equipment. The heating material itself is 1mm and the floor insulation board is 2cm. The whole heating system totals 5-6cm, which makes your indoor space more open. The same 100 square meters of heating area, you can feel about 30 minutes of warmth, an hour or so to set more than 10 degrees. Keep the temperature constant at 10 degrees during the day, and do not work and use electricity all day. Go home at night and set it to 20 degrees. Heat quickly after 20 minutes. You can also open a room by yourself, no one can't open it. It saves energy while it is fast and convenient.