Ground heating installation tells you: in order to make the heater specialty look better, when installing the heater, it is necessary to bury the pipe in the wall, so as not to affect the aesthetic effect of the house. However, there are many things to pay attention to during the specialization, when we specialize in the heater, we mainly divided into several steps.
In the first stage, in the construction of heaters, we should determine the number of heaters to be used, and the width and indirect distance of the heaters. Of course, when installing the heaters, the way of entering and leaving water and the distance between the interface center need to be fixed and encapsulated, and the size should be reserved accurately, otherwise the installation effect of the heaters will be affected later.
In the first stage of installation, attention should also be paid to whether the end of the pipeline is blocked, whether the air tightness of the intake water meets the requirements, and whether its pressure rise value meets the standards, such as its stable pressure value and pressure drop, etc. At the end of the first stage, it needs to be encapsulated, and the heating pipe can not be damaged. It must not be moved or damaged.
In the second stage, when the heater is installed, the walls need to be painted and wallpapered. Only after the installation of the heater and the heater is completed, can the board be installed. During installation, it should be noted that before pressurization, the system needs to be flushed, and no other impurities can be found; then, it should be ensured that the end of the pipeline is blocked, and the exhaust valves should be tightened, etc.
If you have the need of Jinan geothermal heating, you can click on our official website for consultation: http://www.ycepec.com