With the arrival of spring, many new houses have chosen to decorate the floor heating, ushering in the peak period of decoration. We should pay attention to some installation problems when we pay attention to these problems, so as to prevent the later troubles of many floor heating devices. Today, we share with you some problems of floor heating construction.
1. When transferring and installing pipes, no scratches or damages shall be allowed on the surface of pipes; if there are scratches on the surface of pipes, the aging of pipes will be accelerated, resulting in unnecessary results.
2. Ground heating pipes should be laid on soft and elastic surfaces without hard and sharp protrusions. Before laying, the ground must be flat. Most of the equipment companies have their own special extrusion plates.
3. Press connection is better than plug connection.
4. Plastic pipe clamp is the best way to fix the pipeline; plastic nail is enough to connect the pipeline safely and not easy to damage the pipeline; metal nail is easy to damage the surface of the pipeline.
5. The filling layer of geothermal pipeline should be pebble concrete. No gravel concrete is used. Mechanical vibration is strictly forbidden in pouring and tamping of filling layer.
6. It is strictly forbidden to pick nails, dig holes or pile up heat objects on the ground when the ground is warm at low temperature.
7. After the installation of geothermal system, the floor should be paved at least two to three months, so that the ground can be completely dry.
8. After the installation of floor heating, as far as possible lay the home with legs on the floor heating. Home without legs will affect the heat dissipation of floor heating, resulting in uneven indoor heat.
About the spring installation heating demand attention, I share with you here, so install a comfortable, energy-saving, convenient heating system, we must select a professional installation heating company.