The floor heating system must be inspected before installing the floor heating system in Ji'nan. The ground must be dry, the moisture content of the cement ground should be best below 1.5%; the humidity in the room should not be too large. No matter whether there is geothermal heating or not, the humidity of the environment is better than 60 degrees before and after the installation. In the construction, the ground is strictly forbidden. After construction, the ground is also forbidden to nail, to prevent the destruction of heating coil.
Before laying the flooring, the EPE composite membrane should be laid off to keep moisture away from the skirting boards around. The small thermal conductivity of air will affect the heat dissipation effect and may damage the tube. When the floor is laid, the special adhesive for floor heating must be used to increase the use time and effect. Moreover, the glue does not need to worry about the emission of harmful gas. There are expansion joints between the floor and the walls, and use the skirting board which is thicker than the ordinary floor.
Floor heating is a popular mode of heating. Consumers love the floor heating, which is inseparable from its good decoration effect. In the installation of the heating system, in addition to the correct method of installation, we should also pay attention to the selection of warm materials. We must choose the products produced by regular manufacturers to ensure the quality of the installation of warm ground, so as to avoid problems in the later period.
The satisfaction of the customer is the affirmation to us, welcome you to come to choose our company's product, we always think you provide the product as our duty and always insist on doing so. Welcome to your visit.